4DOF DIY Acrylic Robotics Arm with Improved Gripper
SKU: 2106
1) 4-DOF Robot Mechanical Arm Kit with Gripper/Clamp + Servo + Bluetooth Control Kit.
2) 4-DOF structural design can make the robotic arm move in any direction
3) DIY Unassembled Kit, Gives the best Experience of Robotics Learning
4) Bluetooth App-based control
5) No-load speed: 0.12 seconds/60 degrees (4.8V)
6) Blocking torque: 1.2-1.4 kg/cm (4.8V)
7) Operating temperature: -30~60 degrees Celsius
Share this product:
Description:
4-DOF Robot Arm Kit Bluetooth Control Suite-The whole mechanical arm is made of acrylic resin material to ensure the arm is strong enough.4-DOF structural design can make the robotic arm move flexibly, so it can grab objects in any direction. joint of the robot arm is connected by good bearings, which can make the arm move with the smallest friction. Providing Wireless Control Suite, convenient for you to remotely control the robotic arm. Suitable for Arduino learning and controlling theory of automatic robotic arm; guest space and students learning kits.
Features:
4-DOF Robot Mechanical Arm Kit with Gripper/Clamp + Servo + Bluetooth Control Kit.
4-DOF structural design can make the robotic arm move in any direction
DIY Unassembled Kit, Gives the best Experience of Robotics Learning
Bluetooth App-based control
No-load speed: 0.12 seconds/60 degrees (4.8V)
Blocking torque: 1.2-1.4 kg/cm (4.8V)
Operating temperature: -30~60 degrees Celsius
Dead zone setting: 7 microseconds
Working voltage: 4.8V-6V
Note AA batteries are not Included in this Kit.
Package Includes:
1 x Acrylic chassis for 4DOF DIY Acrylic Robotics Arm with Improved Gripper
1 x Arduino Uno R3 Board By Generic
1 x Bluetooth HC-05 Wireless UART Module Generic
1 x USB Cable A Type Male to Male 1 meter Generic
4 x Tower Pro 9G Micro Servo Motor
1 x Battery Holder 4 X AA Cells 6V DC Straight Generic
1 x Li-ion 2 Cell Battery Charger Universal AC Wall For 18650
1 x Battery Holder Case for 2 x 18650 Series Battery Generic
1 x Taparia 810 Steel Two in One Screw Driver (Green and Silver)
1 x Arduino Power Supply Connector(DC Jack Male + Wire)
2 x XTT ICR18650 2200mAh Li-ion Battery
4 x M3 12mm CSK Countersunk Philips Head Screw
4 x M3 x 20 Standoff Brass Nickel Plated Male to Female
3 x M3 x 15 Philips Head Round SS Screw
4 x M3 x 20 Socket Head Allen Cap SS Screw
4 x M3 X 10mm Male-Female Standoff Spacer
5 x Female to Female Jumper Wires
5 x Female to Male Jumper Wire
1 x Arduino Sensor Expansion Shield
15 x M3 6mm CSK Countersunk Philips Head Screws
25 x M3 10mm CSK Countersunk Philips Head Screw
20 x M3 Nut