Products

2 Channel Logic Level Converter 3.3V 5V TTL - Efficient Signal Translation

Rs. 37.00 Rs. 90.00

2 Channel Logic Level Converter 3.3V 5V TTL - Efficient Signal Translation

Rs. 37.00 Rs. 90.00

Material: Plastic + metal.
Compact Design: Portable and easy to use.
Breadboard Compatibility: Direct insertion with 6-pin connectors.
Bidirectional Transfer: Facilitates high to low logic voltage conversion.
Device Compatibility: Arduino, Raspberry Pi, STM32.

SKU: 1190

Type: Logic Level Converter

Vendor: Generic

Quick view Add compare Delete compare

2 Channel PWM Signal Generator Module - Adjustable Duty Cycle

Rs. 126.00 Rs. 179.00

2 Channel PWM Signal Generator Module - Adjustable Duty Cycle

Rs. 126.00 Rs. 179.00

Operating Voltage: 5-30V range
USB Support: Micro USB 5.0V
Frequency Range: 1Hz-150KHz, 2% precision
Output Current: 8-30mA
Output Range: 5V V-pp default
Temperature Range: -30℃ to 70℃
Compact Design: 44x30x11 mm dimensions
Download Datasheet

SKU: 51936

Type: Signal Generator

Vendor: Generic

Quick view Add compare Delete compare

2 Channel Tilt Sensor Module for Accurate Tilt Detection

Rs. 161.00 Rs. 226.00

Out of stock

2 Channel Tilt Sensor Module for Accurate Tilt Detection

Rs. 161.00 Rs. 226.00

Operating Voltage 3.3V-12V
Comparator Wide voltage LM393 for precision
Installation Easy with a fixed bolt hole
Output Current Maximum of 15mA for efficiency
Compatibility Works with low voltages

SKU: 699501

Type: Tilt Sensor

Vendor: Generic

Out of stock

Quick view Add compare Delete compare

2 x 32700 Battery Holder | Lithium Battery Spacer

Rs. 9.00 Rs. 20.00

2 x 32700 Battery Holder | Lithium Battery Spacer

Rs. 9.00 Rs. 20.00

Material: Flame Retardant ABS/PC Plastic
Bore Diameter: 32.35MM
Design: Combines Into Various Sizes
Application: Ideal for Complex Battery Packs
Safety: Vibration Test Approved
Compatibility: Suitable for 1700 Li-ION Batteries
Use: Perfect for Secure eBike Build

SKU: 2803

Type: Battery Holders

Vendor: Generic

Quick view Add compare Delete compare

2.2K Ohm 5% - 0.25W Metal Film Resistor (Pack of 10)

Rs. 10.00 Rs. 20.00

2.2K Ohm 5% - 0.25W Metal Film Resistor (Pack of 10)

Rs. 10.00 Rs. 20.00

Resistance: 2k2 Ohm
Tolerance: 5%
Max. Working Voltage: 250V
Temperature Coefficient: ±50 PPM/°C
Mounting Type: Through Hole
Color Code : Calculator

SKU: 100009

Type: Resistors

Vendor: ELECFUTURE

Quick view Add compare Delete compare

2.54mm Male Berg Strip 40X1 Pin Break-Away Right Angle Header

Rs. 5.00 Rs. 10.00

2.54mm Male Berg Strip 40X1 Pin Break-Away Right Angle Header

Rs. 5.00 Rs. 10.00

Connector: Pin Header Connector
Type: Pin Strips Male
Number of Pins: 40
Angle: 90°
Pitch: 2.54mm

SKU: 10041

Type: Electrical & Electronic Component

Vendor: Generic

Quick view Add compare Delete compare

20A Current Sensor Module ACS712 - Hall Effect Sensor

Rs. 94.00 Rs. 240.00

20A Current Sensor Module ACS712 - Hall Effect Sensor

Rs. 94.00 Rs. 240.00

Detects AC/DC currents up to 20A
Compatible with Arduino and other MCUs
Based on ACS712 Hall Effect
Low-noise analog signal path
Output voltage is proportional to current
Factory trimmed for accuracy
Isolation voltage up to 2.1kV
5 µs output rise time
Download Datasheet here

SKU: 6148

Type: Current Sensor

Vendor: SunRobotics

Quick view Add compare Delete compare

22 Ohm 5%/0.25W Metal Film Resistor (Pack of 10)

Rs. 10.00 Rs. 20.00

22 Ohm 5%/0.25W Metal Film Resistor (Pack of 10)

Rs. 10.00 Rs. 20.00

Resistance: 22 Ohm
Tolerance: 5%
Max. Working Voltage: 250V
Temperature Coefficient: ±50 PPM/°C
Mounting Type: Through Hole
Color Code : Calculator

SKU: 100010

Type: Resistors

Vendor: ELECFUTURE

Quick view Add compare Delete compare

220K Ohm 5% - 0.25W Metal Film Resistor (Pack of 10)

Rs. 10.00 Rs. 20.00

220K Ohm 5% - 0.25W Metal Film Resistor (Pack of 10)

Rs. 10.00 Rs. 20.00

Resistance: 220K Ohm
Tolerance: 5%
Max. Working Voltage: 250V
Temperature Coefficient: ±50 PPM/°C
Mounting Type: Through Hole
Color Code : Calculator

SKU: 100011

Type: Resistors

Vendor: ELECFUTURE

Quick view Add compare Delete compare

270K Ohm 5% - 0.25W Metal Film Resistor (Pack of 10)

Rs. 10.00 Rs. 20.00

270K Ohm 5% - 0.25W Metal Film Resistor (Pack of 10)

Rs. 10.00 Rs. 20.00

Resistance: 270K Ohm
Tolerance: 5%
Max. Working Voltage: 250V
Temperature Coefficient: ±50 PPM/°C
Mounting Type: Through Hole
Color Code : Calculator

SKU: 100012

Type: Resistors

Vendor: ELECFUTURE

Quick view Add compare Delete compare

3 Pin NTC Thermistor Temperature Sensor Module

Rs. 37.00 Rs. 42.00

Out of stock

3 Pin NTC Thermistor Temperature Sensor Module

Rs. 37.00 Rs. 42.00

High Sensitivity with NTC Thermistor Sensor
Digital Output in Clean Waveform
Adjustable Threshold via Potentiometer
Strong Drive Capability over 15mA
Wide Working Voltage of 3.3V to 5V
Easy Installation with Bolt Hole

SKU: 365937

Type: Temperature Sensor Modules

Vendor: Generic

Out of stock

Quick view Add compare Delete compare

3.3K Ohm 5% - 0.25W Metal Film Resistor (Pack of 10)

Rs. 10.00 Rs. 20.00

3.3K Ohm 5% - 0.25W Metal Film Resistor (Pack of 10)

Rs. 10.00 Rs. 20.00

Resistance: 3.3K Ohm
Tolerance: 5%
Max. Working Voltage: 250V
Temperature Coefficient: ±50 PPM/°C
Mounting Type: Through Hole
Color Code : Calculator

SKU: 100015

Type: Resistors

Vendor: ELECFUTURE

Quick view Add compare Delete compare

3.3V/5V MB102 Breadboard Power Supply Module

Rs. 58.00 Rs. 65.00

3.3V/5V MB102 Breadboard Power Supply Module

Rs. 58.00 Rs. 65.00

Breadboard power supply module, compatible with 5V, 3.3V.
Input voltage: 6.5-12 V (DC) or USB power supply.
Output voltage: 3.3V/5V can switch over.
Maximum output current: <700 mA.
Fluctuation control: Two independent road control switchable to 0 V, 3.3 V, 5 V.
On-board groups: Two groups of 3.3V, 5V DC output plug pins, convenient external lead use.
Board Compatibility: Fits securely on MB102 breadboard.
USB Output: Can output 5V directly.
Polarity protection: Reverse polarity protection included.

SKU: 11554

Type: Power Supply

Vendor: Generic

Quick view Add compare Delete compare

3.5mm Audio Jack AV Stereo Module TRRS by CJMCU

Rs. 24.00 Rs. 60.00

3.5mm Audio Jack AV Stereo Module TRRS by CJMCU

Rs. 24.00 Rs. 60.00

Mini design for portability.
Easy to use for quick integration.
Compatible with MP3 players and development boards.
Includes TRRS connector.
Lightweight at only 2 grams.
Multiple applications in audio-video interfaces.

SKU: 3777

Type: Audio Breakout Board

Vendor: Generic

Quick view Add compare Delete compare

3.7V BMS 1S 2A Li-ion 18650 Battery Charging and Protection Board

Rs. 9.00 Rs. 20.00

3.7V BMS 1S 2A Li-ion 18650 Battery Charging and Protection Board

Rs. 9.00 Rs. 20.00

Model Li-ion 18650
Product Li-ion BMS
Charging voltage 3.7V
Charging current 2A-5A
Self-consumption ≤3uA
Color Green
Easy to Use Simple installation

SKU: 10459

Type: Battery Management Systems

Vendor: Generic

Quick view Add compare Delete compare

330 Ohm 5% - 0.25W Metal Film Resistor (Pack of 10)

Rs. 10.00 Rs. 20.00

330 Ohm 5% - 0.25W Metal Film Resistor (Pack of 10)

Rs. 10.00 Rs. 20.00

Resistance: 330 Ohm
Tolerance: 5%
Max. Working Voltage: 250V
Temperature Coefficient: ±50 PPM/°C
Mounting Type: Through Hole
Color Code : Calculator

SKU: 100013

Type: Resistors

Vendor: ELECFUTURE

Quick view Add compare Delete compare

330K Ohm 5% - 0.25W Metal Film Resistor (Pack of 10)

Rs. 10.00 Rs. 20.00

330K Ohm 5% - 0.25W Metal Film Resistor (Pack of 10)

Rs. 10.00 Rs. 20.00

Resistance: 330K Ohm
Tolerance: 5%
Max. Working Voltage: 250V
Temperature Coefficient: ±50 PPM/°C
Mounting Type: Through Hole
Color Code : Calculator

SKU: 100014

Type: Resistor

Vendor: ELECFUTURE

Quick view Add compare Delete compare

3D Printer CNC Shield V4 Expansion Board For Arduino Nano GRBL

Rs. 148.00 Rs. 370.00

3D Printer CNC Shield V4 Expansion Board For Arduino Nano GRBL

Rs. 148.00 Rs. 370.00

Compatibility Worked with Arduino Nano.
Driver Capacity 3 axis stepper motor driver.
Machine Compatibility Micro-drive laser engraving and three-axis CNC engraving machines.
Current Control 2A can be controlled within the two-phase four-wire stepper motor.
Interface Released the digital IO interface, easy to connect to other modules like ENDSTOP.
I2C Interface Connect to LCD I2C or another I2C module.
Power Supply Power DC5V interface, 7.5-12V voltage input.
Compatibility GRBL compatible.

SKU: 3183

Type: CNC Controllers & Accessories

Vendor: Generic

Quick view Add compare Delete compare

3S BMS 11.1V 10A 18650 Lithium Battery Charging and Protection Board - Good Quality

Rs. 94.00 Rs. 240.00

3S BMS 11.1V 10A 18650 Lithium Battery Charging and Protection Board - Good Quality

Rs. 94.00 Rs. 240.00

Protection Board For Lithium Battery
Automatic Protection Reset Once Conditions Restore
Suitable Voltage 11.1V, 12V, and 12.6V
Low Power Consumption Quiescent Current < 30uA
Multiple Protections Overcharge, Over-discharge, Short Circuit, Over-current

SKU: 6449

Type: Battery Management System

Vendor: Generic

Quick view Add compare Delete compare

4 x AA Battery Holder Back to Back Case Box | 6V DC Battery Cell Holder

Rs. 23.00 Rs. 50.00

4 x AA Battery Holder Back to Back Case Box | 6V DC Battery Cell Holder

Rs. 23.00 Rs. 50.00

Spring Clip Design Easily insert batteries
Wire Clip Standard Battery Clip for Wire Extension
Lightweight Weighs about 9g each
Compact Size 54 x 31 x 29mm dimensions
Durable Construction Black color for a sleek look

SKU: 6632

Type: Battery Holders

Vendor: Generic

Quick view Add compare Delete compare

Products

Filter and sort

Filter

247 products

Sort by:

My Wishlist

Compare